Samsung Freestanding Gas Ranges (NX58H9500 Series) Manual De Usuario

Ignition

Make sure all surface burners are properly 
installed.

1.  Push in and turn the control knob to the 

LITE position. You will hear a "clicking" sound 
indicating the electronic ignition system is 
working properly. 

2.  After the surface burner lights, turn the 

control knob to shift it out of the LITE 
position and turn off the electronic ignition 
system.

3.  Turn the control knob to adjust the flame 

level.

Manual ignition

You can ignite the burner manually in case of a power failure. Use caution when doing this.

1.  Hold a long gas grill lighter to the surface burner you want to light. 
2.  Push in and turn the control knob for that burner to the LITE position. Turn on the grill lighter to 

ignite the burner.

3.  After the burner is lit, turn the control knob to adjust the flame level.

Flame level

The flames on the burners should always stay under the cookware, and should not extend beyond 
the cookware bottom at any time.

WARNING
•  Flames larger than the cookware bottom may result in a fire or physical injury.
•  When you set a burner to simmer, do not turn the burner knob quickly. Watch the flame to 

make sure it stays on.

•  After turning on a surface burner, check to make sure that the burner has ignited. Adjust 

the level of the flame by turning the burner knob.

•  Always turn off the surface burner controls before removing cookware. All surface burner 

controls should be turned OFF when you are not cooking.

•  Always turn the burners off before you go to sleep or go out.
•  If you smell gas, turn off the gas to the range and call a qualified service technician. NEVER 

use an open flame to locate a leak.

NX58H9500WS_DG68-00566A-08_EN+MES+CFR.indb   25

2016-09-08     2:14:01