Samsung Freestanding Gas Ranges (NX58H9500 Series) Guía De Instalación

01 
BEFORE

 Y

OU
 BE
g

IN

 & 

IMPOR

TANT
 SAFET

Y

 INFORMA

TION

INSTALLATION SAFETY

 To reduce the risk of fire, electric shock, personal injuries, and/or death, 

obey the following precautions.

•  Have your range installed and properly grounded 

by a qualified installer, in accordance with 

the installation instructions. Any adjustment and 

service should be performed only by qualified gas 

range installers or service technicians.

•  Do not attempt to service, modify, or replace 

your range or any part of your range unless it 

is specifically recommended in this manual. All 

other service should be referred to a qualified 

technician.

•  Always use new flexible connectors when installing a gas appliance. Do not use old 

flexible connectors.

•  Make sure the anti-tip device is properly installed on the range. See the installation 

instructions for more information.

•  Due to the size and weight of the range, have two or more people move the range.
•  Remove all tape and packaging materials.
•  Remove all accessories from the cooktop, oven, and/or lower drawer. Grates and 

griddles are heavy. Use caution when handling them.

•  Make sure no parts came loose during shipping.
•  Make sure your range is correctly installed and adjusted by a qualified service technician 

or installer for the type of gas (natural or LP) you will use. For your range to utilize LP 

gas, the installer must replace the 5 surface burner orifices and 2 oven orifices with the 

provided LP orifice set, and reverse the GPR adapter. These adjustments must be made 

by a qualified service technician in accordance with the manufacturer’s instructions and 

all codes and requirements of the authority having jurisdiction. The qualified agency 

performing this work assumes the gas conversion responsibility.

•  Installation of this range must conform with local codes or, in the absence of local 

codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA.54, latest edition. In 

Canada, installation must conform with the current Natural Gas Installation Code, CAN/

CGA-B149.1, or the current Propane Installation Code, CAN/CGA-B149.2, and with local 

codes where applicable. This range has been design-certified by ETL according to ANSI 

Z21.1, latest edition, and Canadian Gas Association according to CAN/CGA-1.1, latest 

edition.