Samsung PM43F Manual De Usuario
71
Chapter 5. Menu
Problem
Possible Solution
The message
“Disconnecting
Anynet+ device ...”
appears on the screen.
“Disconnecting
Anynet+ device ...”
appears on the screen.
• You cannot use the remote control when you are
configuring Anynet+ or switching to a view mode.
• Use the remote control after the product has
completed Anynet+ configuration or has finished
switching to Anynet+.
switching to Anynet+.
The Anynet+ device
does not play.
does not play.
• You cannot use the play function when initial setup is in
progress.
The connected device
is not displayed.
is not displayed.
• Check whether or not the device supports Anynet+
functions.
• Check whether or not the HDMI cable is properly
connected.
• Check whether
Anynet+ (HDMI-CEC)
is set to
On
in the
System
menu.
• Search Anynet+ devices again.
• Anynet+ requires an HDMI connection. Make sure
• Anynet+ requires an HDMI connection. Make sure
the device is connected to your product with an HDMI
cable.
cable.
• Some HDMI cables may not support Anynet+ functions.
• If the connection is terminated because there has
• If the connection is terminated because there has
been a power failure or the HDMI cable has been
disconnected, please repeat the device scan.
disconnected, please repeat the device scan.