Intel SR1695GPRX1AC Manual De Usuario
Intel® Server System SR1695GPRX TPS
Power Sub-System
Revision 1.5
11
Intel order number: G11332-006
3. Power
Sub-System
The system supports AC 400W 1+1 hot swap power supply module and one power distribution
board which can support 1U rack server system. The single power supply module is 80 plus
energy efficiency, demonstrating climate saver with silver rating.
board which can support 1U rack server system. The single power supply module is 80 plus
energy efficiency, demonstrating climate saver with silver rating.
3.1
Mechanical Overview
The power supply module has a simple retention mechanism to retain the module self once it is
inserted. This mechanism shall withstand the specified mechanical shock and vibration
requirements. The power distribution board will be fixed in the chassis with screws. This
specification defines a 400W 1+1 hot swap redundancy power supply that supports a 1U server
system. Using existing power supply module provided by vendor with updated PMBus* and
custom-made power connector board to support Intel
inserted. This mechanism shall withstand the specified mechanical shock and vibration
requirements. The power distribution board will be fixed in the chassis with screws. This
specification defines a 400W 1+1 hot swap redundancy power supply that supports a 1U server
system. Using existing power supply module provided by vendor with updated PMBus* and
custom-made power connector board to support Intel
®
server board S3420GPRX. The power
supply shall have four outputs: 12V, 5V, 3.3V and 5VSB. The input shall be auto ranging and
power factor corrected. The PMBus* features included in this specification are requirements for
AC silver rated box power supply for use in server systems based on Intel
power factor corrected. The PMBus* features included in this specification are requirements for
AC silver rated box power supply for use in server systems based on Intel
®
SR1695GPRX
Server Platform. This specification is based on the PMBus* specifications part I and II,
revision 1.1.
revision 1.1.
3.1.1
AC Power Supply Unit Dimension Overview
The casing dimension is W 47.0mm x L 233.0mm x H 37.8mm:
Figure 9. AC Power Supply Unit Dimension Overview
3.1.2
AC input connector
The power supply shall have an internal IEC320 C14 power inlet. The inlet is rated for a
minimum of 10A at 250VAC.
minimum of 10A at 250VAC.
3.1.3
AC Power Cord Specification Requirements
The AC power cord used must meet the following specification requirements: