Samsung UN40J5200AF guía electrónica
90
Setting the Time and Using the Timer
Setting the Current Time
MENU
>
System
>
Time
>
Clock
Try Now
Set the clock manually or automatically.
To view the time after the clock is set, press the
INFO
button on your remote.
"
The clock must be reset every time the power is disconnected.
Setting the Clock using Digital Broadcast Info
MENU
>
System
>
Time
>
Clock
>
Clock Mode
Try Now
Set
Clock Mode
to
Auto
. The TV automatically downloads the correct time from a digital channel. To
enable this option, the TV's Antenna jack must be connected to either an antenna or a cable output
and must be receiving digital broadcasts. The accuracy of the time information received may vary
depending on the channel and signal. If your TV is connected to a set-top-box or satellite box using
HDMI or Component connections, you must set the time manually.
and must be receiving digital broadcasts. The accuracy of the time information received may vary
depending on the channel and signal. If your TV is connected to a set-top-box or satellite box using
HDMI or Component connections, you must set the time manually.
If the Clock is Wrong in Auto Mode...
MENU
>
System
>
Time
>
Clock
>
Time Offset
Try Now
If the time the TV sets automatically is incorrect, you can offset the clock in 1-hour increments by as
much as -/+ 12 hours. Select
much as -/+ 12 hours. Select
System
>
Time
>
Clock
>
Time Offset
, and then offset the clock to the
correct time.
"
Time Offset
adjusts the time through a network connection and is only available if the
Clock Mode
is set to
Auto
and the TV is connected to the Internet though a local area network.
"
Time Offset
adjusts the time if the TV fails to receive time information through normal digital broadcast
signals.
General