Samsung SL-C483W Manual De Usuario

When you connect your machine to a network, you must first configure the TCP/

IP settings for the machine. The settings shown below are the basic settings 

required for using your machine as a network machine. You can set TCP/IP, DNS 

server, TCP/IPv6, Ethernet, and IP address allocation methods.

1 

You can set ethernet settings.

Press Machine Setup > Network Settings > Ethernet from the display screen.

 

You can also use this feature from the SyncThru™ Web Service. Open the 
Web browser from your networked computer and type the IP address of 
your machine (see "Settings tab" on page 249).

 

•

Ethernet: You can enable/disable ethernet port.

•

Speed Rate: Choose the speed rate of ethernet.

•

MAC Address: Shows the Mac address of the machine.

2 

You can set IPv4 settings.

Press Machine Setup > Network Settings > TCP/IP > TCP/IPv4 from the 

display screen.

 

You can also use this feature from the SyncThru™ Web Service. Open the 
Web browser from your networked computer and type the IP address of 
your machine (see "Settings tab" on page 249).

 

You can choose the method for allocating IP addresses.

•

Static: Select to enter IP address/Subnet Mask/ Gateway Address manually.

•

BOOTP: IP address/Subnet Mask/ Gateway Address are automatically 
allocated by the BOOTP Server.

•

DHCP: IP address/Subnet Mask/ Gateway Address are automatically 
allocated by the DHCP Server.

You can configure the DNS server.

•

Host Name: Enter the host name. You can enter up to 63 characters. Default 
name is “SEC[MAC address]”.

•

Domain Name: Enter the domain name. You can enter up to 128 characters.

•

Primary DNS Server: Enter the address of the DNS server you want to use primarily.