Samsung SL-C483W Manual De Usuario

9 

To avoid damaging the machine, use only labels designed for use in laser 

printers.

•

When selecting labels, consider the following factors:

-

Adhesives: Should be stable at your machine’s fusing temperature 
about 170 °C (338 °F).

-

Arrangement: Only use labels with no exposed backing between them. 
Labels can peel off sheets that have spaces between the labels, causing 
serious jams.

-

Curl: Must lie flat with no more than 13 mm of curl in any direction.

-

Condition: Do not use labels with wrinkles, bubbles, or other 
indications of separation.

•

Make sure that there is no exposed adhesive material between labels. 
Exposed areas can cause labels to peel off during printing, which can cause 
paper jams. Exposed adhesive can also cause damage to machine 
components.

•

Do not run a sheet of labels through the machine more than once. The 
adhesive backing is designed for only a single pass through the machine.

•

Do not use labels that are separating from the backing sheet or are wrinkled, 
bubbled, or otherwise damaged.

10 

•

In the software application, set the margins to at least 6.4 mm (0.25 inches) 
away from the edges of the material.