Samsung HT-J4500 Manual De Usuario
4
- English
Contents
GETTING STARTED
5 Accessories
5 Speaker Components
6 Front Panel
6 Rear Panel
7 Remote Control
5 Speaker Components
6 Front Panel
6 Rear Panel
7 Remote Control
CONNECTIONS
8 Connecting the Speakers
10 Connecting to a Network Router
11 Connecting to a TV and External Devices
10 Connecting to a Network Router
11 Connecting to a TV and External Devices
SETTINGS
12 The Initial Settings Procedure
13 The Home Screen at a Glance
13 Accessing the Settings Screen
14 Settings Menu Functions
17 Network Setup
18 Upgrading Software
19 Setting Up DLNA
13 The Home Screen at a Glance
13 Accessing the Settings Screen
14 Settings Menu Functions
17 Network Setup
18 Upgrading Software
19 Setting Up DLNA
PLAYING CONTENT
20 Switching the Source Device
20 Playing Commercial Discs
20 Playing a Disc with User Recorded Content
21 Playing Files on a USB Device
22 Controlling Video Playback
24 Playing a Pre-Recorded Commercial Audio
Disc
24 Controlling Music Playback
25 Playing Photo Contents
26 Listening to the Radio
27 Using Bluetooth
29 Using the Special Effects Remote Control
20 Playing Commercial Discs
20 Playing a Disc with User Recorded Content
21 Playing Files on a USB Device
22 Controlling Video Playback
24 Playing a Pre-Recorded Commercial Audio
Disc
24 Controlling Music Playback
25 Playing Photo Contents
26 Listening to the Radio
27 Using Bluetooth
29 Using the Special Effects Remote Control
Buttons
NETWORK SERVICES
30 Using BD-LIVE™
30 Using DLNA
30 Apps
31 Using Opera TV Store
30 Using DLNA
30 Apps
31 Using Opera TV Store
APPENDIX
32 Additional Information
33 Disk and Format Compatibility
38 Troubleshooting
41 Specifications
42 Licences
33 Disk and Format Compatibility
38 Troubleshooting
41 Specifications
42 Licences
Wiring the Main Power Supply Plug (UK Only)
IMPORTANT NOTICE :
The mains lead on this equipment is supplied with a moulded plug incorporating
a fuse. The value of the fuse is indicated on the pin face of the plug and if it requires replacing, a
fuse approved to BS1362 of the same rating must be used. Never use the plug with the fuse cover
removed. If the cover is detachable and a replacement is required, it must be of the same colour as
the fuse fitted in the plug. Replacement covers are available from your dealer. If the fitted plug is not
suitable for the power points in your house or the cable is not long enough to reach a power point,
you should obtain a suitable safety approved extension lead or consult your dealer for assistance.
However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of
the plug. Do not connect the plug to a mains socket as there is a risk of shock hazard from the bared
flexible cord. Never attempt to insert bare wires directly into a mains socket. A plug and fuse must be
used at all times.
fuse approved to BS1362 of the same rating must be used. Never use the plug with the fuse cover
removed. If the cover is detachable and a replacement is required, it must be of the same colour as
the fuse fitted in the plug. Replacement covers are available from your dealer. If the fitted plug is not
suitable for the power points in your house or the cable is not long enough to reach a power point,
you should obtain a suitable safety approved extension lead or consult your dealer for assistance.
However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of
the plug. Do not connect the plug to a mains socket as there is a risk of shock hazard from the bared
flexible cord. Never attempt to insert bare wires directly into a mains socket. A plug and fuse must be
used at all times.
IMPORTANT :
The wires in the mains lead are coloured in accordance with the following code:–
BLUE = NEUTRAL BROWN = LIVE As these colours may not correspond to the coloured markings
identifying the terminals in your plug, proceed as follows:–The wire coloured BLUE must be
connected to the terminal marked with the letter N or coloured BLUE or BLACK. The wire coloured
BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.
identifying the terminals in your plug, proceed as follows:–The wire coloured BLUE must be
connected to the terminal marked with the letter N or coloured BLUE or BLACK. The wire coloured
BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.
` IMPORTANT : DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED
WITH LETTER E OR BY THE EARTH SYMBOL
, OR COLOURED GREEN OR GREEN AND
YELLOW.
HT-J4500_XU-ECO_0306.indd 4
2015/3/9 14:38:34