Samsung BD-J5900 Manual De Usuario

Repeat Step 4 to select and check 

additional desired item.
To remove the desired item from the 

list, press the yELLoW (C) button 

again. 
The check on the desired item is 
removed.
When done, press the 

tooLS button 

and then select the Copy to uSB using 

the ▲▼ buttons. and then press the 
v button. The Copy to USB pop-up 

appears.
Use the ▲▼ buttons to select the 

device to store the copied files, and 
then press the v button.

✎

Do not disconnect the device while 

 

■

copying is in progress.

If you want to cancel copying, press 

the v button and then select yes. 

Select No to continue copying.
When copying is complete, the 

"Copying completed." message 
appears. Press the v button to go 

back to the Playback screen.

✎

This function may not be supported 

 

■

by some discs.
On the Copying screen, you can 

 

■

also choose Select All and deselect 
All1

Use 

 

-

Select All to select all item. 

This cancels your individual item 
selections. 
Use 

 

-

deselect All to deselect all 

selected item at once.

Appendix

Before requesting service, please try the following solutions.

No operation can be 

performed with the 

remote control.

Check the batteries in the remote control. They may need replacing.

 

●

Operate the remote control at a distance of no more than 

 

●

6.1m from the player.
Remove batteries and hold down one or more buttons 

 

●

for several minutes to drain the microprocessor inside the 

remote control to reset it. Reinstall batteries and try to 

operate the remote control again.

Disc does not play.

Ensure that the disc is installed with the label side facing up.

 

●

Check the region number of the Blu-ray Disc/DVD.

 

●

Disc Menu does not 

appear.

Ensure that the disc has disc menus.

 

●

The prohibition 

message appears on 

the screen.

This message appears when an invalid button is pressed.

 

●

The Blu-ray Disc/DVD’s software doesn’t support the 

 

●

feature (e.g., angles).
You’ve requested a title or chapter number or search time 

 

●

that is out of range.

Play mode differs from the 

Setup Menu selection.

Some of the functions selected in the Setup Menu may not work 

 

●

properly if the disc is not encoded with the corresponding function.

The screen ratio 

cannot be changed.

The Screen Ratio is fixed on your Blu-ray Disc/DVD.

 

●

This is not a problem with the player.

 

●

No audio.

Make sure you have selected the correct Digital Output in 

 

●

the Audio Options Menu.

The screen is blank.

If the HDMI output is set to a resolution your TV cannot support 

 

●

(for example, 1080p), you may not see a picture on your TV.
Press the 

 

●

 button (on front panel) for more than 5 

seconds with no disc inside. All settings will revert to the 

factory settings.
When the factory default settings are restored, all stored 

 

●

user BD data is deleted.

You can control the playback of photo 
content located on a Blu-ray disc, DVD, 
CD, USB device, or your computer. 

During playback, press the tooLS button.

Select to start or stop the 
slide show.

Select to set a slide show's 
speed.

Select to listen to music 
while viewing a slide 
show.

Select to enlarge the 
current picture. (Enlarge 
up to 4 times)

Select to rotate the picture. 
(This will rotate the picture 
either clockwise or counter 
clockwise.)

Shows the picture information.

✎

Depending on the disc or storage 

 

■

device, the Tools menu may differ.
To enable the background music 

 

■

function, the photo file must be 
in the same storage media as the 
music file. 
However, the sound quality can be 
affected by the bit rate of the MP3 
file, the size of the photo, and the 
encoding method.
You can't enlarge the subtitle and 

 

■

PG graphic in the full screen mode.