Samsung Електрична Варочна поверхня NZ-5000H із зоною Flex Zone, 7,2 кВт Manual De Usuario

English - 20

Other reasons why a cooking zone will switch itself off

All cooking zones will switch themselves off if liquid boils over and

lands on the control panel.

The automatic shutoff will also be activated if you place a

damp cloth on the control panel. In both of these instances,

the appliance will need to be switched on again using the main

On/Off control sensor after the liquid or the cloth has been

removed.

RESIDUAL HEAT INDICATOR

When an individual cooking zone or the hob is turned off, the

presence of residual heat is shown with an , (for “hot”) in the

digital display of the appropriate cooking zones. Even after the

cooking zone has been switched off, the residual heat indicator

goes out only after the cooking zone has cooled.

You can use the residual heat for thawing or keeping food warm.

WARNING

As long as the residual heat indicator is illuminated, there is a

risk of burns.

WARNING

If the power supply is interrupted, the , symbol will go out

and information about residual heat will no longer be available.

However, it may still be possible to burn yourself. This can be

avoided by always taking care when near the hob.

TEMPERATURE DETECTION

If for any reason the temperatures on any of the cooking zones

were to exceed the safety levels, should this happen then the

cooking zone will automatically reduce to a lower power level.

When you have finished using the hob, the cooling fan will

continue to run until the hob’s electronics has cooled down. And

the cooling fan switched itself off depending upon the temperature

of the electronics.

NZ64H57479K_WT_DG68-00562A-01_EN.indd 20

2014-07-11 10:58:23