Samsung Wireless Mono Multifunction Printer Manual De Usuario

.4   

<Introduction>

Shows the current status and prompts during an operation. The 
message shows with specific LEDs as below. LEDs are working with 
short message on a display.

• error  LED

Blinks when the error occurs on your machine. If it blinks rapidly, the 
machine has stopped for some reason. Check the display message 
to solve the problem.

• paper LED

Blinks when the paper in the tray is empty. 

• toner LED

Blinks when the estimated cartridge life of toner is close, or 

toner cartridge is invalid.

 Check the display message and replace 

the toner cartridge.

• paper jam LED

Lights blink when there is a paper jam in the machine. Check the 
display message to release the jammed paper.

See page 9.7 about more information on the display messages.

: Increases the number of printouts. Number can be changed 

by using up/down arrows. Possible values can be added up to 99.

: Press this button to reduce or enlarge an image on 

the paper. You have to use up/down arrows to change the size.

: Defines the degree of darkness. Use up/down arrows to 

change the level of light/dark in the printouts.

: Moves to the next value when the one of copy 

buttons pressed.

: Stops an operation at any time. Also, You can print a 

machine report by pressing this button for about 4 seconds.

: Scans an original to your computer.

: Starts a copy job.

You can power on or off the control panel by pressing and holding this 
button for a few seconds.

Shows the status of wireless network. When the LED on, the machine 
is ready.