Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Samsung
  4. Networked Color Multifunction Printer
  5. Manual De Usuario

Samsung Networked Color Multifunction Printer Manual De Usuario

Descargar
Página de 218
Troubleshooting_ 56
Paper Jam 2
Check Inside
Paper has jammed In 
the fuser area or 
around the toner 
cartridge
Clear the jam. (See "In 
Refilled Toner
T
The toner cartridge 
you have installed is 
not genuine or refilled. 
The arrow indicates 
which color toner 
cartridge.
The print quality may get 
poor if the refilled toner 
cartridge is installed, 
since its characteristics 
may significantly differ 
from the genuine. We 
recommend Samsung-
genuine color toner 
cartridge.
Replace Toner
T
This message 
appears between 
Toner Empty
 and 
Toner Low
 status.
Replace the toner 
cartridge with a new one. 
Replace 
[xxx]
The life of the part 
expires totally.
Replace the part with a 
new one. Call for 
service.
Replace 
[xxx] Soon
The life of the part 
expires soon.
page 51 and call for 
service.
Replace/Install 
Toner Waste Bin
The life span of the 
waste toner tank has 
expired and the printer 
will stop printing until 
a new waste toner 
tank is placed into the 
machine.
Replace the waste toner 
bank with a new one. 
Scan Unit Open
The scan unit is not 
securely latched.
Close the scan unit it 
locks into place.
Scanner locked
The scanner module 
is locked
Turn the power switch 
off and on. If the problem 
persists, call for service.
Send Error
(AUTH)
There is a problem in 
SMTP authentication.
Configure the 
authentication setting.
Send Error
(DNS)
There is a problem in 
DNS.
Configure the DNS 
setting.
Send Error
(POP3)
There is a problem in 
POP3.
Configure the POP3 
setting.
Send Error
(SMTP)
There is a problem in 
SMTP.
Change to the available 
server.
Send Error
(Wrong Config)
There is a problem on 
the network interface 
card.
Configure your network 
interface card correctly.
[Stop Pressed]
Stop/Clear
 has been 
pressed during an 
operation.
Try again.
MESSAGE
MEANING
SUGGESTED 
SOLUTIONS
Toner Empty
T
A toner cartridge has 
almost reached its 
estimated cartridge 
life.
 
Press OK to toggle 
the message to Stop 
or Continue or Black 
Only
.
W Stop X 
If the black 
toner cartridge 
is empty, 
Black Only
 
message does 
not appear.
You can select the 
option among Stop, 
Continue
 or Black Only 
with the left/right arrow. 
If you select Stop by 
pressing OK on the 
control panel, the 
machine stops printing. 
If you select Continue, 
the machine keeps 
printing, but the quality 
cannot be guaranteed. 
If you select Black Only, 
the machine prints the 
data in black. In this 
case, the mono printing 
feature is preset in the 
printer properties.
When you copy, the 
Black Start
 button will 
be activated only with 
this condition.
If you do not select any, 
the machine will work as 
Stop
 is selected.
Replace the toner 
cartridge for the best 
print quality when this 
message appears. Using 
a cartridge beyond this 
stage can result in 
printing quality issues. 
Toner Exhausted
T
A toner cartridge has 
reached its estimated 
cartridge life. The 
printer stops printing.
Replace the toner 
cartridge. (See 
Toner Low
T
Small amount of toner 
is left in the cartridge. 
The estimated 
cartridge life of toner 
is close.
Prepare a new cartridge 
for replacement. You 
may temporarily 
increase the printing 
quality by redistributing 
the toner. (See 
Transfer Belt 
Error
A problem has 
occurred in the 
transfer belt in the 
machine.
Turn the power switch 
off and on. If the problem 
persists, call for service.
Tray 
Paper Empty
There is no paper in 
the tray.
Load paper in the tray.
Tray 
Paper Mismatch
The paper size 
specified in the printer 
properties does not 
match the paper you 
are loading.
Load the correct paper in 
the tray.
MESSAGE
MEANING
SUGGESTED 
SOLUTIONS