Samsung Networked Color Multifunction Printer Manual De Usuario

Getting started

Press the left/right arrow to select the setup method you want 

appears and press OK.

•

: The wireless network interface card in your printer searches 

for wireless networks in the area and shows the results.

•

: You can configure the wireless settings according to your 

needs.

The wireless network interface card on your machine searches for 

wireless network in the area and shows the results.

Press the left/right arrow to select a network you want to use in 
Search List

 and press OK. You can select a network using SSID.

When WLAN Security  None appears on  the display, press OK  to 

save your selection. go to step 6.

If you see another messages, go to the next step.

According to the network you select, WLAN security encryption type 

will be WEP or WPA.

•

In case of WEP, Press the left/right arrow to selcet Open System or 
SharedKey

.

- Open System: Authentication is not used, and Encryption may or 

  may not be used, depending on the need for data security. Enter 

  the WEP Key using number keypad after selecting Open System.

- SharedKey: Authentication is used. A device that has a proper

  WEP Key can access the network. Enter the WEP Key using

  number keypad after selecting SharedKey.

•

In case of WPA, Enter the WPA Key using number keypad. The Key 

length should be between 8 to 63 characters long.

Press OK.

Press Stop/Clear to return to ready mode.

Enter the SSID, the name that identifies a wireless network, when 
Edit SSID 

appears on the top line of the display.  SSID is case-

sensitive so you need to enter it carefully. Press OK.

Select the type of wireless connections. Press the left/right arrow to 

select the method of Operation Mode you want and press OK.

•

: Allows wireless devices to communicate directly with each 

other in a peer-to-peer environment. Go to step 4.

•

: Allows wireless devices to communicate with each 

other through an access point. Go to step 5.

Press the left/right arrow to select the method of Channel you want 

and press OK. If you select Auto, the wireless network interface card 

on your machine will automatically adjust the channels.

Press the left/right arrow to select the method of WLAN Security 

you want and press OK.

•

: This is used when the validation of a wireless device’s identity 

and data encryption are not required for your network. Open system 

is used for IEEE 802.11 authentication.

•

: This uses the WEP (Wired Equivalent Privacy) algorithm 

suggested by IEEE 802.11 standard for security. Static WEP security 

mode requires a proper WEP key for data encryption, decryption, 

and IEEE 802.11 authentication. Press the left/right arrow to select 

the setup method you want in Authentication and press OK.
- Open System: Authentication is not used, and encryption may or 

may not be used, depending on the need for data security. Enter the 
WEP Key 

using number keypad after selecting Open System and 

then press OK.
- SharedKey: Authentication is used. A device that has a proper 

WEP key can access the network. Enter the WEP Key using number 

keypad after selecting SharedKey and then press OK.

•

 or WPA2-PSK: You can select WPA-PSK or WPA2-PSK 

to authenticate the print server based on WPA Pre-Shared Key. This 

uses a shared secret key (generally called Pre Shared Key 

passphrase) which is manually configured on the access point and 

each of its clients.

Press OK when WPA-PSK or WPA2-PSK appears on the bottom 

line of the display.

Press the left/right arrow to select TKIP or AES in Encryption  and 

press OK. If you select  WPA2-PSK, press the left/right arrow to 

select AES or TKIP + AES in Encryption  and press OK.

Enter the WPA Key using number keypad and press OK.

When you have finished, press Stop/Clear to return to the ready 

mode. If you do not know about your wireless environment, please 

ask the network administrator.

Now go to Installing the driver software.

Before starting wireless parameter configuration, make sure cable 

connection status. 

Start a web browser such as Internet Explorer, Safari or Firefox and 

enter your machine’s new IP address in the browser window. 

For example,

When the SyncThru Web Service window opens, click Network 
Settings

.

•

: SSID (Service Set Identifier) is a name that identifies a 

wireless network. Access points and wireless devices 

attempting to connect to a specific wireless network must use 

the same SSID. The SSID is case-sensitive.

•

 : WEP (Wired Equivalent Privacy) is a security protocol 

preventing unauthorized access to your wireless network. 

WEP encrypts the data portion of each packet exchanged on a 

wireless network using a 64-bit or 128-bit WEP encryption key.

•

 : WPA authorizes and identifies users based on a secret 

key that changes automatically at regular intervals. WPA also 

uses TKIP (Temporal Key Integrity Protocol) and AES 

(Advanced Encryption Standard) for data encryption.