Samsung Wireless Color Multifunction Printer Manual De Usuario

Getting started

The window shows the wireless network setting and check if settings 

are right. Click Next.

•

For the DHCP method

If the IP address assignment method is DHCP, check if DHCP is 

shown in the window. However, if it shows Static, click Change TCP/

IP to change the assignment method to DHCP.

•

For the Static method

If the IP address assignment method is Static, check if Static is 

shown in the window. However, if it shows DHCP, click Change 

TCP/IP to enter the IP address and other network configuration 

values for the printer. Before entering the IP address for the printer, 

you must know the computerís network configuration information. If 

the wireless computer is set to DHCP, you must contact the network 

administrator to get the static IP address.

Example)
If computer’s network information is as below:

IP address:   169.254.133.42

Subnet Mask:  255.255.0.0

Printer’s network information should be as below:

IP address: 169.254.133. 43 (Use computer’s IP address, with 

changed last three digits.)

Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.)

Gateway: 169.254.133.1 (Change the last three digits from IP 

address of your printer to 1.)

The wireless network is connecting according to the network 

configuration.

When the wireless network setting is completed, disconnect the USB 

cable between the computer and machine. 

Select the components to be installed. 

After selecting the components, you can also change the printer 

name, set the printer to be shared on the network, set the printer as 

the default printer, and change the port name of each printer. Click 
Next

.

After the installation is finished, a window appears asking you to print 

a test page and to register yourself as a user of Samsung Printers in 

order to receive information from Samsung. If you desire, select the 

corresponding checkbox(es) and click Finish.

Ensure you have next items ready.
•

Access point

•

Networked computer

•

Printer Software CD-ROM that provided with your machine

•

Wireless network printer (your machine)

•

USB cable

When items are ready, follow the next procedure:
1.

Connect the USB cable provided with your machine.

Turn on your computer, access point and printer.

Put the provided Printer Software CD-ROM into your CD-ROM drive.

The CD-ROM starts automatically and the welcome message shows 

on the window. Select a language from the drop-down list and click 
Next

.

Select Wireless Setup and click Next.

The software searches the wireless network devices.

After searching, the window shows the wireless network devices. 

Select the name (SSID) of access point you are using and click 
Next

.

 

The wireless network security window appears. The window may 

differ according to its security mode, WEP or WPA.

•

In case of WEP

Select Open System or Shared Key for the authentication and enter 

WEP security key. Click Next.

WEP (Wired Equivalent Privacy) is a security protocol preventing 

unauthorized access to your wireless network. WEP encrypts the 

data portion of each packet exchanged on a wireless network using 

a 64-bit or 128-bit WEP encryption key.

•

In case of WPA

Enter the WPA shared key and click Next.

WPA authorizes and identifies users based on a secret key that 

changes automatically at regular intervals. WPA also uses TKIP 

(Temporal Key Integrity Protocol) and AES (Advanced Encryption 

Standard) for data encryption.

The window shows the wireless network setting and check if settings 

are right. Click Next.

•

For the DHCP method

If the IP address assignment method is DHCP, check if DHCP is 

shown in the window. However, if it shows Static, click Change TCP/

IP to change the assignment method to DHCP.

•

For the Static method

If the IP address assignment method is Static, check if Static is 

shown in the window. However, if it shows DHCP, click Change 

TCP/IP to enter the IP address and other network configuration 

If the searching has failed, you may check if the USB cable is 

connected between the computer and printer properly, and 

follow the instruction on the window.

When you set the wireless configuration manually, click 
Advanced Setting

.

•

: Type the SSID of wireless computer, the 

SSID is case-sensitive.

•

: Select Infrastructure.

•

: Select an authentication type.

: Authentication is not used, and encryption 

may or may not be used, depending on the need for data 

security.
Shared Key

: Authentication is used. A device that has a 

proper WEP key which can access the network.
WPA Personal

 or WPA2 Personal: Select this option to 

authenticate the print server based on WPA Pre-Shared 

Key. This uses a shared secret key (generally called Pre 

Shared Key passphrase) which is manually configured on 

the access point and each of its clients.

•

: Select the encryption. (None, WEP64, 

WEP128, TKIP, AES, TKIP AES)

•

: Enter the encryption network key value.

•

: Confirm the encryption network key 

value.

•

: It is enabled when WEP is set for 

 after selecting Open System or Shared Key. 

Enter the WEP key.

After setting in Advanced Setting, go to the step 9.

The wireless network security window does not appear when 

the access point has no security setting.