Samsung Mono Multifunction Printer SCX-452 Manual De Usuario

Faxing (Only for SCX-4521F/ SCX-4521FR)

7.11

You can set your machine to send a fax at a later time when you 
will not be present. 

Load the document(s) face up into the ADF.

OR
Place a single document face down on the document 
glass.
For details about loading a document, see ?$paratext>? 
on page 7.3.

Adjust the document resolution to suit your fax needs (see 
?$paratext>? on page 7.4).

If you need to change the darkness, see ?$paratext>? on 
page 7.2.

Press Menu until “Fax Feature” appears on the top line of 
the display. The first available menu item, “DelayFax” 
displays on the bottom line.

Press Enter.

Enter the number of the receiving machine using the 
number keypad.

You can also press and hold the digit button of the speed 
dial number if you have assigned one. To store the speed 
dial number, see ?$paratext>? on page 7.8.

Press Enter to confirm the number on the display. The 
display asks you to enter another fax number to which to 
send the document.

: The Another No. prompt does not appear if you have 

added numbers for another broadcast or delay fax job. You 

must wait until the job is completed.

To enter more fax numbers, press 1 to select “Yes” and 
repeat steps 5 and 6. You can add up to 10 destinations.

Note that you can input group dial numbers only once at 
first.

When you finish entering fax numbers, press 2 to select 
“No

”

 at the Another No. prompt.

The display asks you to enter a name. 

To assign a name to the transmission, enter the name you 
want. For details about entering characters, see 
?$paratext>? on page 2.9.

If you do not want to assign a name, skip this step.

Press Enter. The display shows the current time and asks 
you to enter the starting time when the fax is to be sent. 

Enter the time using the number keypad.

To select “AM” or “PM” for 12-hour format, press the   or 

 button or any number button.

If you set a time earlier than the current time, the 
document will be sent at that time on the following day. 

Press Enter when the starting time displays correctly.

The document is scanned into memory before 
transmission. The display shows memory capacity and the 
number of pages being stored in memory.

For a document placed on the document glass, the display 
asks if you want to load another page. Select “1:Yes” to 
add. Otherwise, select “2:No”.

The machine returns to Standby mode. The display 
reminds you that you are in Standby mode and that a 
delayed fax is set.

: If you want to cancel the delayed transmission, see 

?$paratext>? on page 7.12.

Using the Priority Fax feature, a high priority document can be 
sent ahead of reserved operations. The document is scanned 
into memory and transmitted when the current operation is 
finished. In addition, priority transmission will interrupt a 
broadcast operation between stations (i.e., when the 
transmission to station A ends, before transmission to station B 
begins) or between redial attempts.

Load the document(s) face up into the ADF.

OR
Place a single document face down on the document 
glass.
For details about loading a document, see ?$paratext>? 
on page 7.3.

Adjust the document resolution to suit your fax needs (see 
?$paratext>? on page 7.4).

If you need to change the darkness, see ?$paratext>? on 
page 7.2.

Press Menu until “Fax Feature” appears on the top line of 
the display. 

Press the scroll button (  or  ) to display “Priority Fax” on 
the bottom line and press Enter.

Enter the number of the receiving machine using the 
number keypad.

You can also press and hold the digit button of the speed 
dial number if you have assigned one. To store the speed 
dial number, see ?$paratext>? on page 7.8.

Press Enter to confirm the number. The display asks you 
to enter a name. 

To assign a name to the transmission, enter the name you 
want. For details about entering characters, see 
?$paratext>? on page 2.9. 

If you do not want to assign a name, skip this step.