Samsung Mono Multifunction Printer Manual De Usuario

A.11

:

• For the best print quality, position margins no closer than 15 mm (0.6 in.) from the 

edges of the envelope.

• Avoid printing over the area where the envelope’s seams meet.

Proper storage of envelopes helps contribute to print quality. Envelopes should be 

stored flat. If air is trapped in an envelope, creating an air bubble, then the envelope 

may wrinkle during printing.

: 

• To avoid damaging the machine, use only labels recommended for laser printers.
• To prevent serious jams, always use the manual feeder to print labels and always use 

the rear output tray.

• Never print on the same sheet of labels more than once and never print on a partial 

sheet of labels.

When selecting labels, consider the quality of each component:

• Adhesives: The adhesive material should be stable at 180°C (356°F), the 

machine’s fusing temperature.

• Arrangement: Only use labels with no exposed backing between them. Labels can 

peel off sheets with spaces between the labels, causing serious jams.

• Curl: Prior to printing, labels must lie flat with no more than 13mm (5in.) of curl in 

any direction.

• Condition: Do not use labels with wrinkles, bubbles or other indications of 

separation.

Transparencies used in the machine must be able to withstand 180°C (356°F), the 

machine’s fusing temperature.

: To avoid damaging the machine, use only transparencies recommended for 

use in laser printers.