Samsung Mono Multifunction Printer Manual De Usuario

4.5   

<Loading originals and print media>

Load the print media you use for the majority of your print jobs in the tray. 
The tray can hold a maximum of 100 sheets of 75 g/m

2

 (20 lb bond) plain 

paper. 

Press the tray open button, then the tray pops out. Pull the tray 
completely out.     

When the tray does not close properly, pull the tray half way out 
and try again.

Place paper with the side you want to print facing down.

Align the tray with the slot, and slide it into the machine.    

After loading paper, set the paper type and size for the tray. See 
Software section for PC-printing.  

• You can load previously printed paper. The printed side should 

be facing up with an uncurled edge at the rear. If you 

experience problems with paper feed, turn the paper around. 

Note that print quality is not guaranteed. 

To load different sizes of paper, such as custom-sized paper, you need to 
adjust the paper guides.     

Adjust the paper length guide to the desired paper length. It is 
preset to Letter or A4 size depending on the country. To load 
another size, hold the lever and move the length guide to the 
corresponding position.

• The tray is preset to Letter or A4 size, depending on your 

country.

• For example, if you want to change the size to Letter, hold the 

lever at the back of the tray, and rotate the lever clockwise.