Samsung Mono Multifunction Printer Manual De Usuario

Copying

4.3

: If you press Stop/Clear or no buttons are pressed for 

approximately 30 seconds, the machine cancels the copy job 

and returns to Standby mode.

Press Start to begin copying.

This feature prints 2 original images reduced to fit onto one 

sheet of paper.

Place the document to be copied on the document glass 

and close the cover. 

Press Menu until Special Copy appears on the top line of 

the display.

Press the scroll button (  or  ) until 2-UP appears and 

press OK.

Customize the copy settings including copy size, darkness, 

and original type, by using the control panel buttons. See 

: You cannot adjust the copying size using the Reduce/

Enlarge menu while making a 2-UP copying.

Press Start to begin copying.

Your machine begins scanning the front side and will then 

display Set Next Page Press Start. 

Place the second document to be copied on the document 

glass.

Press Start to begin copying.

: 2-UP copying reduces your original document by 50%.

This feature prints an image onto 9 sheets of paper (3x3). You 

can paste the printed pages together to make one poster-sized 

document.

Place the document to be copied on the document glass 

and close the cover.

Press Menu until Special Copy appears on the top line of 

the display.

Press the scroll button (  or  ) until Poster appears and 

press OK.

Customize the copy settings including copy size, darkness, 

and original type, by using the control panel buttons. See 

Press Start to begin copying.

1

2

: You cannot adjust the copy size using the Reduce/

Enlarge menu while making a poster.

Your original document is divided into 9 

portions. Each portion is scanned and printed 

one by one in the following order:

You can set the time the machine waits before it restores the 

default copy settings, if you do not start copying after changing 

them on the control panel.

Press Menu until Copy Setup appears on the top line of 

the display. 

Press the scroll button (  or  ) until Timeout appears and 

press OK.

Press the scroll button (  or  ) to select the time setting 

you want.

Selecting Off means that the machine does not restore the 

default settings until you press Start to begin copying, or 

Stop/Clear to cancel.

Press OK to save your selection.

press Stop/Clear to return to Standby mode.