Samsung SR8855 Manual De Usuario

Maintain tools and filter

_41

Maintain tools and filter

04
M

AINT

AIN
TOOLS

AND

FIL
TER

CLEANING THE ROBOTIC VACUUM CLEANER

CLEANING THE EDGE-CLEANING SIDE ROTATING BRUSH

2. Wearing rubber gloves, wrap the side rotating brush with

a cloth using hot water for about 10 seconds and wipe it

on the cloth.

1. Check whether the side rotating brush is bent or

whether there are any foreign substances stuck on the
brush.

You must turn off the Power Switch at the bottom of the

main unit before cleaning the robotic vacuum.

3. Turning the side rotating brush, repeat the procedures

in Step 2.

4. If hair or string is wrapped between the main unit

and the side rotating brush, undo the screw of the

side rotating brush using a (+) driver to remove it.

When reassembling the brush, check the “L” mark

on the edge-cleaning side rotating brush and the “L”

mark on the main unit and then reassemble the side

rotating brush.

(Letter “R” is carved at the right side rotating brush.)

NOTE

Because the side rotating brush easily attracts hair and other foreign substances,

make sure to clean it frequently.

Excessive foreign substances on the side rotating brush can damage the brush.