Samsung SCX-6345N Manual De Usuario

3.2   

<Getting Started>

The following table shows the network environments supported by the 
machine: 

You can setup TCP/IP Network parameters please follow the steps listed 
below. To setup Netware and Apple Talk please refer to the on-line user's 
guide located on the Network Utilities CDs.

Make sure your machine is connected to the network with an RJ-45 
Ethernet cable.

Make sure you turned on the machine.

Press Machine Setup on the control panel.

Press Admin Setting.

When the login message appears, enter password. Touch the 
password input area, then the question marks appears. Use the 
number keypad on the control panel to enter the password. Once 
the password is entered, press OK. (Factory setting:1111)

Press the Setup tab > Network Setup.

Select TCP/IP Protocol.

Press IP Setting. 

Select Static and then enter IP Address, Subnet Mask and 
Gateway address fields. Touch the input area then, enter addresses 
by number keypad on the control panel. 

Network interface

10/100 Base-TX

Network operating 
system

Novell NetWare 4.x, 5.x, 6.x
Windows 98/Me/NT 4.0/2000/XP/2003
Various Linux OS
Macintosh 10.3 ~ 10.4

Network protocols

IPX/SPX
TCP/IP
EtherTalk 

Dynamic addressing 
server

DHCP, BOOTP

Contact the network administrator, if you are not sure how to 
configure.

10 Press OK.

You have to install the machine software for printing, copying, faxing, and 
scanning. The software includes drivers, applications, and other user 
friendly programs. 

The following procedure is based on the Windows XP 
operating system. The procedure and popup window which 
appears during the installation may differ depending on the 
operating system, the printer feature, or the interface in use.
(See Software section.)

Make sure that the network setup for your machine is completed. 
(Page 3.1) All applications should be closed on your computer 
before beginning installation.

Insert the Printer Software CD-ROM into your CD-ROM drive.

The CD-ROM should automatically run, and an installation window 
appears. Click Next.

You can also set up the network settings through the network 
administration programs. Refer to the user’s guide on the 
Network Utilities CD that came with your machine.
• SyncThru™ Web Admin Service: Web-based printer 

management solution for network administrators. SyncThru™ 
Web Admin Service provides you with an efficient way of 
managing network devices and lets you remotely monitor and 
troubleshoot network printers from any site with corporate 
internet access.

• SyncThru™ Web Service: Web server embedded on your 

network print server, which allows you to:
-  Configure the network parameters necessary for the machine 

to connect to various network environments.

-  Customize email settings and set up address book for 

scanning to email.

-  Customize server settings and set up address book for 

scanning to the FTP or SMB servers.

-  Customize printer, copy, and fax settings.

• SetIP: Utility program allowing you to select a network interface 

and manually configure the IP addresses for use with the TCP/
IP protocol.