Samsung HT-TP33 Manual De Usuario

13

If you television is equipped with an SCART input, connect an Scart Jack (not supplied) from the
AV OUT jack on the back panel of the system to the SCART IN jack on your television.

Connect the supplied video cable from the VIDEO OUT jack on the back panel of the
system to the VIDEO IN jack on your television.

If your television is equipped with Component Video inputs, connect a component video
cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the
corresponding jacks on your television.

•

When the Progressive scan mode is selected, the VIDEO and SCART outputs
do not feed any signal. 

14

Choose one of the three methods for connecting to a TV.

•

"

" or "

" will appear in the display. 

At this time, press the 

button shortly to select between "

" and "

".

•

If Scart (RGB Input) is equipped for your TV, press VIDEO SEL. button to select RGB mode. 
You can get a better picture quality by using Scart setting.

•

If Scart (RGB Input) is not equipped for your TV, press VIDEO SEL. button to select COMPOSITE
mode.

•

Make sure the colors of the speaker terminals
match the colors of the connecting plugs.

Black

Press down the terminal
tab on the back of the
speaker. 

Insert the black wire into
the black terminal (–) and
the gray wire into the gray
(+) terminal, and then
release the tab.

Connect the connecting plugs to
the back of the DVD player.

Gray

Rear Speaker (R)

Front Speaker (R)

Subwoofer

Center Speaker

Rear Speaker (L)

Front Speaker (L)