Samsung UDE-P Guía De Instalación Rápida
Quick Setup Guide
- The colour and the appearance may differ depending on the product, and the specifications
are subject to change without prior notice to improve the performance.
- Download the user manual from the website for further details.
http://www.samsung.com/displaysolutions
UD55E-P UD55E-S
BN68-07328J-00
Reverse Side
IR
OUT
CONTROL IN
DP IN
HDMI IN 1
HDMI IN 2
DVI IN
(MAGIC INFO)
AV /
COMPONENT
AUDIO
OUT
IN
RS232C OUT
RS232C OUT
RS232C OUT
RS232C OUT
RS232C IN
RS232C OUT
RGB IN
RJ45
USB
DP OUT
(LOOPOUT)
1
Connects to MDC using an RS232C cable.
- For details on how to use the MDC programme, refer to Help after
installing the programme.
The MDC programme is available on the website.
The MDC programme is available on the website.
2
Receives the remote control signal via the external sensor board and
outputs the signal via LOOP OUT.
outputs the signal via LOOP OUT.
3
Supplies power to the external sensor board or receives the light sensor signal.
4
Connects to a PC using a DP cable.
5
Connects to a source device using an HDMI cable.
6
Connects to another product using a DP cable.
- To use old and new models together, first contact the dealer the
- To use old and new models together, first contact the dealer the
product was purchased from to check if they are compatible.
7
DVI IN: Connects to a source device using a DVI cable or HDMI-DVI cable.
MAGIC INFO: Use the (dedicated) DP-DVI cable when connecting a
network box (sold separately).
network box (sold separately).
8
Connects to a source device using a D-SUB cable.
9
Connects to a source device using the AV/Component adapter.
0
Connects to the audio of a source device.
!
Receives sound from a PC via an audio cable.
@
Connects to MDC using a LAN cable.
#
Connect to a USB memory device.
Issues
Solutions
The screen keeps
switching on and off.
switching on and off.
Check the cable connection between the
product and PC, and ensure the connection is
secure.
product and PC, and ensure the connection is
secure.
No Signal is displayed
on the screen.
on the screen.
Check that the product is connected correctly
with a cable.
Check that the device connected to the
product is powered on.
with a cable.
Check that the device connected to the
product is powered on.
Not Optimum Mode is
displayed.
displayed.
This message is displayed when a signal
from the graphics card exceeds the product’s
maximum resolution and frequency.
Refer to the Standard Signal Mode Table and
set the maximum resolution and frequency
according to the product specifications.
from the graphics card exceeds the product’s
maximum resolution and frequency.
Refer to the Standard Signal Mode Table and
set the maximum resolution and frequency
according to the product specifications.
The images on the
screen look distorted.
screen look distorted.
Check the cable connection to the product.
The screen is not clear.
The screen is blurry.
The screen is blurry.
Adjust Coarse and Fine.
Remove any accessories (video extension
cable, etc) and try again.
Set the resolution and frequency to the
recommended level.
Remove any accessories (video extension
cable, etc) and try again.
Set the resolution and frequency to the
recommended level.
The screen appears
unstable and shaky.
unstable and shaky.
Check that the resolution and frequency of the
PC and graphics card are set within a range
compatible with the product. Then, change the
screen settings if required by referring to the
Additional Information on the product menu
and the Standard Signal Mode Table.
PC and graphics card are set within a range
compatible with the product. Then, change the
screen settings if required by referring to the
Additional Information on the product menu
and the Standard Signal Mode Table.
There are shadows or
ghost images left on the
screen.
ghost images left on the
screen.
Issues
Solutions
The screen is too bright.
The screen is too dark.
The screen is too dark.
Adjust Brightness and Contrast.
Screen colour is
inconsistent.
inconsistent.
Go to Picture and adjust the Colour Space
settings.
settings.
White does not really
look white.
look white.
Go to Picture and adjust the White Balance
settings.
settings.
There is no sound.
Check the connection of the audio cable or
adjust the volume.
adjust the volume.
Check the volume.
The volume is too low.
Adjust the volume.
If the volume is still low after turning it up to
the maximum level, adjust the volume on
your PC sound card or software programme.
the maximum level, adjust the volume on
your PC sound card or software programme.
The remote control does
not work.
not work.
Make sure that the batteries are correctly in
place (+/-).
place (+/-).
Check if the batteries are flat.
Check for power failure.
Make sure that the power cord is connected.
Check for any special lighting or neon signs
switched on in the vicinity.
switched on in the vicinity.
Troubleshooting Guide
Checking the Components
External sensor KIT
POWER
1
2
3
4
5
1
Remote Control Sensor
Aim the remote control towards this spot on the LCD Display.
Aim the remote control towards this spot on the LCD Display.
2
Light sensor
Automatically detects the intensity of ambient light around a
selected display and adjusts the screen brightness.
Automatically detects the intensity of ambient light around a
selected display and adjusts the screen brightness.
3
Power indicator
The power indicator will turn off when the product is turned on. It
will blink in power-saving mode.
The power indicator will turn off when the product is turned on. It
will blink in power-saving mode.
4
POWER button
Use this button for turning the LCD Display on and off.
Use this button for turning the LCD Display on and off.
5
SOURCE button
Switches from PC mode to Video mode.
Selects the input source that an external device is connected to.
Switches from PC mode to Video mode.
Selects the input source that an external device is connected to.
Contact the vendor where you purchased the product if any
components are missing.
components are missing.
Quick Setup Guide
Warranty card
(Not available in some
locations)
Regulatory guide
+
+
-
-
MagicInfo Software
DVD
Power cord
Batteries
(Not available in some
locations)
Remote Control
DP cable
AV/Component
adapter
AUDIO adapter
Holder-Ring (4EA) /
Screw (4EA)
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered trademarks of HDMI Licensing
LLC in the United States and other countries.
HDMI Logo are trademarks or registered trademarks of HDMI Licensing
LLC in the United States and other countries.
[UD55E-P_S-India-QSG]BN68-07328J-00.indd 1
2015-06-30 10:34:29