Samsung RT5562DTBWW Manual De Usuario

setting up

_09

SETTING

INSTALLING THE DOOR
HANDLE

1. Match the Handle Locking Tabs installed on

the left hand side of the door and the handle
inserts.

2. Pull down the handle to fix until this makes

“

Thump” sound and slightly hit its top with a

tool like a rubber hammer to fix.

3. Check whether the locking tabs inside the

handle are assembled by pulling it up and
down.

SETTING UP THE
REFRIGERATOR

Now that you have your new refrigerator installed
and in place, you are ready to set up and enjoy
the full features and functions of the appliance.
By completing the following steps, your refrigerator
should be fully operational.
If not, first check the power supply and electricity
source or try the troubleshooting section at the
back of this user guide.
If you have any further questions, contact your
Samsung Electronics service center.

1. Place the refrigerator in an appropriate location

with reasonable clearance between the wall
and the refrigerator.
Refer to installation instructions in this manual.

2. Once the refrigerator is plugged in, make sure

the interior light comes on when you open the
doors.

3. Set the temperature control to the coldest

temperature and wait for an hour.
The freezer should get slightly chilled and the
motor should run smoothly.

4. After powering the refrigerator, it will take a few

hours to reach the appropriate temperature.
Once the refrigerator temperature is sufficiently
cool, you can store food and drink in the
refrigerator.

DA68-02636D-02.indb 9

2015. 7. 3. �� 9:04