ICOM IC-U82 Manual De Usuario

Descargar
Página de 96
10
3
BATTERY PACKS
Battery charging
D
Regular charging with the BC-146
The optional BC-146 provides regular charging of an optional
battery pack with or without a transceiver attached. The fol-
lowing is additionally required:
• An optional AC adapter. (An AD-99N is supplied with BC-146.)
D
About AD-99N
The adapter (Spacer A) only is required for IC-V82/U82 se-
ries. When removing the spacer (Spacer B/C), push the latch
carefully with your finger to remove the spacer (Spacer B/C)
from the adapter (Spacer A).
R
CAUTION!
• DO NOT push or force the latch with a screw driver, etc.,
to remove it.
• DO NOT bend the latch when the adapter and spacer are
not joined together. This will cause weakening of the latch
plastic.
• Both cases may break the latch and it may not be able to
be reattached.
Push the latch
carefully.
Remove the spacer (Spacer B/C) 
from the adapter.
Check orienta-
tion for correct 
charging. (In-
sert together 
with  AD-99N.)
Turn power OFF.
BC-146+AD-99N
• Chargeable battery
  BP-210N (Ni-MH battery)
  BP-209N, BP-222N
  (Ni-Cd batteries) 
Recommendation:
Charge the BP-211N (Li-Ion) by BC-119N (or BC-121N) for
a maximum of 2.5 hours. Li-Ion batteries are different from
Ni-Cd batteries in that it is not necessary to completely
charge and discharge them to prolong the battery life.
Therefore, charging the battery in intervals, and not for ex-
tended periods is recommended.