ICOM IC-U82 Manual De Usuario

15

4

BASIC OPERATION

■

D

Rotate [VOL] to set the desired
audio level while receiving a sig-
nal.

• When no signal is received, push

and hold [MONI] while setting the
audio level. 

• When [VOL] is assigned as tuning

dial, push [

Y

Y

]/[

Z

Z

] to adjust the audio

output level. (pgs. 14, 65)

D

While pushing [MONI], push
[

Y

Y

]/[

Z

Z

] to set the squelch level.

• The squelch level “1” is loose

squelch, “10” is tight squelch.

• When [VOL] is assigned as tuning

dial, rotate [VOL] while pressing
[MONI]. (pgs. 14, 65)

■

q

Push and hold [PWR] for 1 sec. to turn the power ON.

w

Adjust audio volume to the desired level.

e

Set the frequency.
When a signal is received:
• Squelch opens and audio is emitted from the speaker.
• Signal indicator shows the relative signal strength level.

r

Push [A•

], then [9•

] to select output power be-

tween high, middle and low.
• “L” appears when low power is selected.
• “M” appears when middle power is selected.
• No indication appears when high power is selected.

t

Push and hold [PTT] to transmit, then speak into the micro-
phone.
• “

$

” appears.

• Do not hold the microphone too close to your mouth or

speak too loudly. This may distort the signal.

y

Release [PTT] to receive. 

✔

Push and hold [MONI] to listen to weak signals that do not
open the squelch.

[VOL]