Apple performa 630 series Manuales De Servicio
Take Apart
Logic Board - 25
Note:
Perform the
following steps only if you
are replacing a defective
logic board.
3 Remove the two Phillips
3 Remove the two Phillips
screws that secure the
fence to the solder side of
the logic board.
4 Using a T9 torx driver,
remove the two torx
screws that secure the
logic board fence to the
SCSI connector.
5 Separate the logic board
fence from the logic
board.
Torx Screw
Torx Screw
Logic Board Fence
Phillips Screw
Phillips Screw
Logic Board
SCSI
Connector