Acer al1516
8
FRONT PANEL CONTROL
•
Power Button:
Press this button to turn the monitor ON or OFF, And display the
monitor’s state.
monitor’s state.
•
Power Indicator:
Green —
Power On mode.
Orange —
•
MENU / ENTER :
Activate OSD menu when OSD is OFF or activate/de-activate
adjustment function when OSD is ON or Exit OSD menu when in
Volume Adjust OSD status.
adjustment function when OSD is ON or Exit OSD menu when in
Volume Adjust OSD status.
•
<:
Navigate through adjustment icons when OSD is ON or adjust a
function when function is activated.
function when function is activated.
•
>:
Navigate through adjustment icons when OSD is ON or adjust a
function when function is activated.
function when function is activated.
•
Auto Adjust button / Exit:
1. When OSD menu is in active status, this button will act as EXIT-KEY
(EXIT OSD menu).
2. When OSD menu is in off status, press this button for 2 seconds to
activate the Auto Adjustment function.
The Auto Adjustment function is used to set the HPos, VPos, Clock
and Focus.
The Auto Adjustment function is used to set the HPos, VPos, Clock
and Focus.
NOTES
•
Do not install the monitor in a location near heat sources such as
radiators or air ducts, or in a place subject to direct sunlight, or
excessive dust or mechanical vibration or shock.
excessive dust or mechanical vibration or shock.
•
Save the original shipping carton and packing materials, as they will
come in handy if you ever have to ship your monitor.
•
For
maximum
protection,
repackage your monitor as it was originally
packed at the factory.
•
To keep the monitor looking new, periodically clean it with a soft
cloth. Stubborn stains may be removed with a cloth lightly dampened
with a mild detergent solution. Never use strong solvents such as
thinner, benzene, or abrasive cleaners, since these will damage the
cabinet. As a safety precaution, always unplug the monitor before
cleaning it.
with a mild detergent solution. Never use strong solvents such as
thinner, benzene, or abrasive cleaners, since these will damage the
cabinet. As a safety precaution, always unplug the monitor before
cleaning it.
Stand by mode.