Acer al1512 Manual De Usuario
Attachme
Power Saver).
brings the LC display into low voltage status automatically to
tly or press any key to r
ow
aver fun
n only be operated by the display card of the c
m. Y
can set
unction from your computer.
play is comp
er and extend e life of the product, turn off
when remaining idle for a lo
at the pow
k tha
e power
tha
e power ca
he signal cab
display is res
ed when you press any ke
r to olor Temperat e Adjustment” to adjust RGB color or select col
nt
Plug and Play
The product provides the latest VESA plug and play function to prevent complicated
and time-consuming installation procedures. The plug and play function allows your
computer system to identify the LCD display easily and set up the functions of the
LCD display automatically.
and time-consuming installation procedures. The plug and play function allows your
computer system to identify the LCD display easily and set up the functions of the
LCD display automatically.
The LCD display transfers the Extended Display Identification Data (EDID) to your
computer system via the Display Data Channel (DDC), so that your computer can
use the self-setting function of the LCD display.
computer system via the Display Data Channel (DDC), so that your computer can
use the self-setting function of the LCD display.
Power Saver
The LCD display has a built-in Power Control System (
When the LCD display is not operated during a certain time, the Power Control
System will
System will
D
save
power. Move the mouse sligh
eturn to the normal operation.
The P
er S
ction ca
omputer
syste
ou
up this f
The LCD dis
atible with EPAENERGY STAR NÜTEK when used with
VESA DPMS.
To save pow
th
the LCD display power
supply when it is not used or
ng time.
Troubleshooting
Power LED does not
light
Check that the power switch is turned on.
Make sure th
er cable is connected.
Icon off
Chec
t th
switch is turned on.
Make
t th
ble is connected.
Ensure that t
le is inserted in the receptacle appropriately.
The Power Saver may turn off the display automatically during the operation. Make
sure that the
sure that the
tor
y from the keyboard.
Color Default
Refe
“C
ur
or
temperatures.
Instability or Ripple
Remove the electronic equipment in the vicinity that may cause EMI interference.
Check the signal cable of the display and ensure that no pin is bent.
Image Offset or
wrong Size
Press the auto adjustment button to optimize the screen automatically.
Set up the reference position.
6