Acer acerpower 6200 Manual De Usuario
BIOS Utility
2-7
Selecting the “User” Option
There are cases when you cannot use the option
Auto
, instead you
have to select
User
. Choose the
User
option when you have installed
an IDE hard disk that was previously formatted but does not use the
disk native parameters or structure, that is, the disk may be formatted
according to the user specified number of cylinders, heads, and
sectors.
disk native parameters or structure, that is, the disk may be formatted
according to the user specified number of cylinders, heads, and
sectors.
Follow these steps to configure an IDE hard disk with the
User
option:
1.
Highlight an IDE drive parameter.
2.
Select the option
User
and press
.
3.
Type in the number of cylinders, heads, and sectors of the drive
under the appropriate columns.
under the appropriate columns.
Be sure to have the correct IDE hard disk
drive information beforehand.
drive information beforehand.
4.
Choose
Yes
when asked if you want to save CMOS data.
2.2.4
Total Memory
The system automatically detects the total amount of onboard memory
during the POST and sets this parameter accordingly. If you install
additional memory, the system automatically adjusts this parameter to
display the new memory size.
during the POST and sets this parameter accordingly. If you install
additional memory, the system automatically adjusts this parameter to
display the new memory size.