Acer g193wl Guía De Instalación Rápida

English

Acer LCD Monitor Quick Start Guide (QSG)

Please read the following instructions carefully.
1     To clean the LCD monitor screen:

•     Turn off the LCD monitor and unplug the power cord.

•     Spray a non-solvent cleaning solution onto a rag and clean the screen gently.

2     Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely 

damage it.

3     Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.

4     Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform 

servicing of any nature.

5     Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor 

outside this range may result in permanent damage.

6     Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:

•     Monitor-to-PC signal cable is frayed or damaged.

•     Liquid spills onto the LCD monitor or the monitor is exposed to rain.

•     The LCD monitor or case is damaged.

LCD monitor

AC Power 

cable

DVI cable 

(Optional)

VGA cable

AC Adapter

User guide

Quick start guide

1     Remove the monitor base from the packaging and place it on a stable and level workspace.

2     Remove the monitor from the packaging.

3     Attach the monitor stand arm to the base.

•     Ensure that the base is locked onto the monitor stand arm. (for selected models)

•     Secure the base to the monitor stand arm by turning the white screw using the integrated tab or a suitable coin.    

       (for selected models)

1     Turn off your computer and unplug your computer’s power cord.

2     Connect the signal cable to the VGA and/or DVI-D (optional) input 

socket of the monitor, and the VGA and/or DVI-D (optional) output 

socket of the graphics card on the computer. Then tighten the 

thumbscrews on the signal cable connector.

3     Connect one end of the adapter to the monitor and the other end 

to a properly grounded, AC outlet.

4     Plug the power cords of your computer and your monitor into a 

nearby electrical outlet.

1

Power button/

indicator

Turns the monitor on/off. Blue indicates 

power on. Blinking blue indicates standby/

power saving mode.

2

 / 

 button

Press the 

 / 

 button to navigate to the 

desired function or to change the settings of 

the current function.

3

Menu/Enter 

button

Press to view the OSD menu. Press it again to 

enter a selection in the OSD menu. 

4

Auto/Exit 

button

•  When the OSD menu is active, press this 

button to exit the OSD menu.

•  When the OSD menu is inactive, press this 

button to activate the Auto Adjustment 

function.

5

Empowering

Key

Press this button to open the Acer eColor 

Management OSD and access the scenario modes. 

S1

90W

L

LC

D M

ON

ITO

R 

P/N

:M

U.L

UH

00.0

08

194

7-1

600

-114

1