Acer g223hql Guía De Instalación Rápida

English

Acer LCD Monitor Quick Start Guide (QSG)

Important safety instructions
Please read the following instructions carefully.

1  To clean the LCD monitor screen:

Turn off the LCD monitor and unplug the power cord.

Spray a non-solvent cleaning solution onto a rag and clean the screen gently.

2  Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.

3  Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.

4  Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of 

any nature.

5  Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside this 

range may result in permanent damage.

6  Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:

Monitor-to-PC signal cable is frayed or damaged.

Liquid spills onto the LCD monitor or the monitor is exposed to rain.

The LCD monitor or case is damaged.

LCD monitor

AC Power cable DVI cable 

(Optional)

VGA cable

HDMI cable 

(Optional)

AC Adapter

User guide

Quick start 

guide

1  Remove the monitor base from the packaging and place it on a stable and level workspace.

2  Remove the monitor from the packaging.

3  Attach the monitor stand arm to the base.

Ensure that the base is locked onto the monitor stand arm. (for selected models)

Secure the base to the monitor stand arm by turning the white screw using the integrated tab or a suitable coin. (for 

selected models)

1  Turn off your computer and unplug your computer’s power cord.

2  Connect the signal cable to the VGA and/or DVI-D (optional) and/or 

HDMI (optional) input socket of the monitor, and the VGA and/or DVI-D 

(optional) and/or HDMI (optional) output socket of the graphics card 

on the computer. Then tighten the thumbscrews on the signal cable 

connector.

3  Connect one end of the adapter to the monitor and the other end to a 

properly grounded, AC outlet.

4  Plug the power cords of your computer and your monitor into a nearby 

electrical outlet.

1

Power button / 

indicator

Turns the monitor on/off. Blue indicates power 

on. Blinking blue indicates standby / power 

saving mode.

2

 / 

 button

Press the 

 / 

 button to navigate to the desired 

function or to change the settings of the current 

function.

3

Menu / Enter 

button

Press to view the OSD menu. Press it again to 

enter a selection in the OSD menu. 

4

Auto / Exit 

button

When the OSD menu is active, press this 

button to exit the OSD menu.

When the OSD menu is inactive, press 

this button to activate the Auto Adjustment 

function.

5

Empowering 

Key

Press this button to open the Acer eColor 

Management OSD and access the scenario modes. 

S2

00

HL/S

220H

QL

/S230HL

LC

D M

ON

ITO

R 

P/N:MU.405

00.011

1947-

1600-

1171