Acer h235hl Guía De Instalación Rápida

Acer LCD Monitor Quick Start Guide (QSG)

Important safety instructions

Please read the following instructions carefully. 

1

To clean the LCD monitor screen:
•

Turn off the LCD monitor and unplug the power cord.

•

Spray a non-solvent cleaning solution onto a rag and clean the screen gently.

2

Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight 
can severely damage it. 

3

Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the 
display. 

4

Do not remove the cover or attempt to service this unit yourself. An authorized technician should 
perform servicing of any nature. 

5

Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD 
monitor outside this range may result in permanent damage.

6

Immediately unplug your monitor and call an authorized technician if any of the following 
circumstances occur:
•

Monitor-to-PC signal cable is frayed or damaged. 

•

Liquid spills onto the LCD monitor or the monitor is exposed to rain. 

•

The LCD monitor or case is damaged. 

Package contents 

Attaching the monitor to the base 

1

Remove the monitor base from the packaging and place it on a stable and level workspace. 

2

Remove the monitor from the packaging. 

3

Attach the the monitor stand arm to the base.
•

Ensure that the base is locked onto the monitor stand arm. (for selected models)

•

Secure the base to the monitor stand arm by turning the white screw using the integrated tab 
or a suitable coin. (for selected models)

Connecting your monitor to a computer  

1

Turn off your computer and unplug your computer's power 
cord. 

3

Insert the monitor power cable into the power port at the 
back of the monitor. 

4

Plug the power cords of your computer and your monitor into 
a nearby electrical outlet.

External controls

 

 

* for selected models

LCD

+!!

Audio cable

monitor

Powercord

VGA cable

DVI cable

User

Quick start
guide

 s guide

Eng

lish

2

Connect the signal cable to the VGA and/or DVI-D and/or 

           HDMI input socket of the monitor, and the VGA and/or 
           DVI-D and/or HDMI output socket of the graphics card on 
           the computer. Then tighten the thumbscrews on the signal 
           cable connector.

IIcon

Item

Description

Power button/
indicator

Turns the monitor on/off. 

Blue indicates power on. Amber 

indicates standby/power saving mode.

OSD functions

Press to view the OSD. Press again to enter a selection in the OSD.

Auto adjust 
button/Exit

Press the Empowering Key to open the Acer eColor Management 
OSD and access the scenario modes.

If the OSD is active, press 

!to exit the OSD. Once the OSD is 

inactive, press 

 and the monitor will automatically optimize 

the display position, focus, and clock of your display.

Empowering Key

Press to adjust volume. 

monitor.

(a)   VGA input (b) DVI-D input (c) HDMI input

Use 

 key to select between three different video source

that may be connected to your

Input

Key