Acer x163wl Manual De Usuario
EN-11
INSTALLATION
To install the monitor to your host system, please follow the steps as given
below:
Steps
1. Connect Video Cable
below:
Steps
1. Connect Video Cable
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the VGA video cable to the computer.
b. Connect the VGA video cable to the computer.
2. Connect power cord
Connect the power cord to the monitor, then to a properly grounded AC
outlet.
outlet.
3. Power-ON Monitor and Computer
Power-ON the monitor first, then power-ON the computer.
This sequence is very important.
This sequence is very important.
4. If the monitor still does not function properly, please refer to the
troubleshooting section to diagnose the problem.