Acer v226hql Guía De Instalación Rápida

Attaching the monitor to the base 

Acer LCD Monitor Quick Start Guide (QSG)

Please read the following instructions carefully.

1. 

To clean the LCD monitor screen: 

Turn off the LCD monitor and unplug the power cord.

Spray a non-solvent cleaning solution onto a rag and clean the screen gently.

2. 

Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely 
damage it. 

3. 

Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display. 

4. 

Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform 
servicing of any nature. 

5. 

Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor 
outside this range may result in permanent damage.

6. 

Immediately unplug your monitor and call an authorized technician if any of the following circumstances 
occur:

Monitor-to-PC signal cable is frayed or damaged. 

Liquid spills onto the LCD monitor or the monitor is exposed to rain. 

The LCD monitor or case is damaged. 

LCD 

monitor

Power cord

Audio 

cable 

(optional)

VGA cable

(optional)

DVI cable     DP cable  Quick start 

(optional)

(optional)

guide

1. 

Turn off your computer and unplug your computer's power 
cord.

2. 

Connect the signal cable to the VGA and/or DVI-D (optional) 
and /or DP (optional) input socket of the monitor, and 
the VGA and/or DVI-D (optional) and/or DP (optional) 
output socket of the graphics card on the computer. Then 
tighten the thumbscrews on the signal cable connector.

3. 

Optional: Connect the audio input socket (AUDIO IN) of the 
LCD monitor and the line-out port on the computer with 
the audio cable.

4. 

Insert the monitor power cable into the power port at the 
back of the monitor.

5. 

Plug the power cords of your computer and your monitor 
into a nearby electrical outlet. 

English

Attaching the monitor to the base 

1

Remove the monitor base from the packaging and place it on a stable and level workspace. 

2

Remove the monitor from the packaging. 

3

Align the release button at the buttom of the monitor with the corresponding slot at the bottom of 
the base. A clicking sound signifies that the monitor has been securely attached to the base.

 

Attaching the monitor to the base 

LR60441

Attaching the monitor to the base 

ᅝ㺙ᰒ⼎఼ᑩᑻ

LR60441

ᅝ㺙ᰒ⼎఼ᑩᑻ

LR60441

ᅝ㺙ᰒ⼎఼ᑩᑻ

ㆴḻݽ

LR60441

LR60441

૽ㆴḻݽમ⡶ᅠಎಚ

ㆴḻݽ

LR60441

LR60441

૽ㆴḻݽમ⡶ᅠಎಚ