Acer x193hql Manual De Usuario

X193HQL 

 

INSTALLATION 

To install the monitor to your host system, please follow the steps as given 
below: 

Steps 

1.  1-1  Connect Video Cable 

 

a. Make sure both the monitor and computer are powered-OFF. 

 

b. Connect the VGA video cable to the computer. 

 

1-2  Digital Cable (Only Dual-Input Model) 

 

a. Make sure both the monitor and computer are powered-OFF. 

 

b. Connect one end of the 24-pin DVI cable to the back of the monitor and connect the other 

end to the computer's port. 

2.  Connect power cord 

Connect the power cord to the monitor, then to a properly grounded AC outlet. 

3.  Power-ON Monitor and Computer 

Power-ON the monitor first, then power-ON the computer. 
This sequence is very important. 

4.  If the monitor still does not function properly, please refer to the troubleshooting section to 

diagnose the problem.