abit gf4 mx Manual De Usuario
5-14 Chapter
5
5-6. BIOS Flashing Utility
You may update the newest drivers or BIOS files from your dealer or directly
download from our WEB site at
download from our WEB site at
NOTE: When you use the flash utility to flash the BIOS, the screen will be blank for
about 10 seconds. This is a normal situation, not a malfunction. Do not reboot your
computer during this period, or you may cause the flash to fail.
about 10 seconds. This is a normal situation, not a malfunction. Do not reboot your
computer during this period, or you may cause the flash to fail.
Reboot your computer into DOS environment, or open a Windows
®
95/98
window to the DOS prompt.
Insert the Installation CD into your CD-ROM drive.
Insert the Installation CD into your CD-ROM drive.
1.
2.
3.
4.
5.
Copy CWSDPMI.EXE and NVFLASH.EXE to a new directory from path
D:\NVFLASH. (D: refers to the CD-ROM drive letter)
D:\NVFLASH. (D: refers to the CD-ROM drive letter)
Copy the new BIOS binary file to the new directory.
Change to the new directory and type the following command:
NVFLASH –F [Filename]. ([Filename] refers to the name of BIOS binary file.)
Then press the “Enter” key. The program will begin flashing your display card
BIOS.
NVFLASH –F [Filename]. ([Filename] refers to the name of BIOS binary file.)
Then press the “Enter” key. The program will begin flashing your display card
BIOS.
When the flash is complete (the screen will display images again), you must
reboot your computer system to make flash take effect.
reboot your computer system to make flash take effect.
Siluro GF4 MX Series