abit bg-72 Manual De Usuario
3-10 Chapter
3
Delay Prior to Thermal
Enables you to set the delay time before the CPU enters auto thermal mode.
Thermal Management
This item displays CPU’s temperature and enables you to set a safe temperature to
protect CPU.
protect CPU.
TM2 Bus Ratio
This item represents the frequency (bus ratio) of the throttled performance state that
will be initiated when the on-die sensor goes from not hot to hot).
will be initiated when the on-die sensor goes from not hot to hot).
TM2 Bus VID
This item represents the voltage of the throttled performance state that will be initiated
when the on-die sensor goes from not hot to hot.
when the on-die sensor goes from not hot to hot.
Limit CPUID MaxVal
This item can support Prescott CPUs for old OS. Users please note that under NT 4.0,
it must be set “Enabled”, while under WinXP, it must be set “Disabled”.
it must be set “Enabled”, while under WinXP, it must be set “Disabled”.
Back to Advanced BIOS Features Setup Menu
#
Virus Warning
When this feature is enabled, if there is any attempt from a software or an application
to access the boot sector or the partition table, the BIOS will warn you that a boot
virus is attempting to access the hard disk.
to access the boot sector or the partition table, the BIOS will warn you that a boot
virus is attempting to access the hard disk.
CPU L3 Cache
This item is only available when processors support L3. Some high-end processors
support L3. If the CPU do support L3, you may set this item to enable or disable.
Leave this item at the default value for better performance.
support L3. If the CPU do support L3, you may set this item to enable or disable.
Leave this item at the default value for better performance.
CPU Hyper-Threading
This item is only available when the chipset supports Hyper-Threading and you are
using a Hyper-Threading CPU.
using a Hyper-Threading CPU.
BG-72