abit bg-72 Manual De Usuario

If you want an incoming call on a modem to automatically resume the system from a 
power-saving mode, use this item to specify the interrupt request line (IRQ) that is 
used by the modem. You might have to connect the fax/modem to the motherboard 
Wake On Modem connector for this feature to work. 

Under ACPI (Advanced Configuration and Power management Interface) you can 
create a software power down. In a software power down, the system can be resumed 
by Wake Up Alarms. This item lets you install a software power down that is 
controlled by the power button on your system. If the item is set to Instant-Off, then 
the power button causes a software power down. If the item is set to Delay 4 Sec. then 
you have to hold the power button down for four seconds to cause a software power 
down. 

This item controls the CPU speed by cutting down its regular power to a percentage 
during the STR (Suspend To RAM) state. 

This item allows users to enable or disable PCI activity to wakeup the system from a 
power saving mode. 

Use this item to enable LAN or modem activity to wakeup the system from a power 
saving mode.   

When set to [Enabled], you can remotely wake up a PC in Soft-Off condition via a 
LAN card that support the wake up function.