Access virus os4 Manual De Usuario
242
CHAPTER
23
Tips, tricks and other Words of Wisdom
FILT GAIN
LFO1 lets you modulate the volume
of a voice. You’ll find this function
under LFO1 Amount FILT GAIN in
the LFO 1 menu. We deliberately
positioned the point of modula-
tion prior to the filter section, so
that the degree of distortion can
be modulated at the same time
when you have activated the SAT-
URATION unit. Beyond that, you
can use fast LFO cycles to elicit
brief impulses from the oscillator
signal (transients) in order to
excite resonance in the filters. In
this case, the filters will fade out
freely since their output signals are
not affected by the FILT GAIN vol-
ume modulation.
of a voice. You’ll find this function
under LFO1 Amount FILT GAIN in
the LFO 1 menu. We deliberately
positioned the point of modula-
tion prior to the filter section, so
that the degree of distortion can
be modulated at the same time
when you have activated the SAT-
URATION unit. Beyond that, you
can use fast LFO cycles to elicit
brief impulses from the oscillator
signal (transients) in order to
excite resonance in the filters. In
this case, the filters will fade out
freely since their output signals are
not affected by the FILT GAIN vol-
ume modulation.
01111111111111111112
1 LFO 1
FiltGain +2≤
FiltGain +2≤
61111111111111111154
VOLUME CONTROL
Next to the Oscillator Volume
knob, the Virus features four other
volume stages for every SINGLE or
PART:
knob, the Virus features four other
volume stages for every SINGLE or
PART:
Patch VolumeVolume level of the
sound program. Use Patch Volume
to balance out the fundamental
differences in levels between the
different sound programs. The
Patch Volume is stored along with
the sound program. The unit value
is 100.
sound program. Use Patch Volume
to balance out the fundamental
differences in levels between the
different sound programs. The
Patch Volume is stored along with
the sound program. The unit value
is 100.
Part VolumeVolume level of the
MULTI-PART. Use Part Volume to
balance out the different levels
within a MULTI program. Part Vol-
ume is stored along with the
MULTI program. The unit value is
zero since Part Volume is a bipolar,
relative parameter.
MULTI-PART. Use Part Volume to
balance out the different levels
within a MULTI program. Part Vol-
ume is stored along with the
MULTI program. The unit value is
zero since Part Volume is a bipolar,
relative parameter.
Channel Volume
and ExpressionThese two perfor-
mance controllers (Ctr. #7 and #11)
can be used in order to make tem-
porary changes in signal level via a
sequencer or volume pedal. Like all
mance controllers (Ctr. #7 and #11)
can be used in order to make tem-
porary changes in signal level via a
sequencer or volume pedal. Like all