abit sg-95 Manual De Usuario

Descargar
Página de 44
Hardware Setup
 
 
SG-95 
2-11 
2.5.2 DDR2 Memory Slots 
     
 
To install system memory: 
1.  Power off the computer and unplug the AC power cord before installing or removing 
memory modules. 
2.  Locate the DIMM slot on the board. 
3.  Hold two edges of the DIMM module 
carefully, keep away from touching its 
connectors. 
4.  Align the notch key on the module with 
the rib on the slot. 
5.  Firmly press the module into the slots 
until the ejector tabs at both sides of the slot automatically snap into the mounting notch. 
Do not force the DIMM module in with extra force as the DIMM module only fits in one 
direction. 
6.  To remove the DIMM modules, push the two ejector tabs on the slot outward 
simultaneously, and then pull out the DIMM module. 
※  Static electricity can damage the electronic components of the computer or 
optional boards. Before starting these procedures, ensure that you are 
discharged of static electricity by touching a grounded metal object briefly.