ACR Electronics rcl-100 Manual De Usuario

Descargar
Página de 23
Y1-03-0138R
 
SECTION 2 - GENERAL 
 
The  RCL-100D  was  specially  designed  for  mariners  who  require  a 
high  intensity  remote  controlled  searchlight  that  can  stand  up  to  the 
tough marine environment. 
 
The  RCL-100D  Searchlight  System  contains  a  narrow  beam 
searchlight  that  produces  200,000  peak  candle  power  by  combining 
two  55W  halogen  lamps  with  our  unique  optical  quality  parabolic 
reflectors.  
 
All functions of the Searchlight can be electrically operated by remote 
control  from  the  pilot  area  of  the  vessel  using  the  URP-102  Point 
Pad™,  URC-102  Master  Controller,  and  interconnect  cable  supplied 
with the RCL-100D. Searchlights equipped with the URC-102 Master 
Controller  now  have  ACR's  unique  XRCiZ
™  feature.  The  XRCiZ™ 
feature routinely operates  all moving parts in the Searchlight to keep 
the motors and drive mechanism freely running.  
 
SECTION 3 - SEARCHLIGHT 
 
The  sleek  design  and  modern  construction  of  the  Searchlight  body 
makes  it  attractive  for  recreational  and  commercial  vessels.  The 
Searchlight is totally enclosed and is made of rugged aluminum alloy. 
It is gasketed and finished to be resistant to the weather. 
 
Mounting 
Make sure the area is clean and dry. The Searchlight can be mounted 
where  desired,  using  appropriate  length  3/16"  diameter,  stainless 
steel fasteners. Four (4) nylon shoulder washers are supplied with the 
RCL-100D  Searchlight.  The  nylon  washers  prevent  a  galvanic 
reaction  between  the  mounting  hardware  and  the  base  of  the 
Searchlight.  Be  sure  these  washers  have  been  inserted  in  the  base 
mounting  holes  and  that  the  mounting  base  gasket  is  securely  in 
place  before  bolting  down.  Silicone  grease  should  be  applied  to  the 
bottom  of  the  gasket  to  help  in  waterproofing  the  unit.  When 
mounting,  be  sure  that  the  Searchlight  is  able  to  rotate  360°  without 
hitting  any  obstructions.  For  the  drilling  hole  pattern,  refer  to  the 
Searchlight Mounting Template, supplied in the Mounting Templates. 
 
CAUTION:  Do  not  mount  the  searchlight  upside  down.  Moisture 
will not be able to drain from the inverted light head assembly.