Alcatel-Lucent omniaccess 6000 Manual De Usuario

Part 031639-00

May 2005

z

This requires a 4- or 8-conductor Category 5 UTP Ethernet cable with an RJ-45 
male connector. The port detects MDI/MDX and automatically adjusts for 
straight-through or crossover cables.

The maximum length for FE cables is 100 meters (325 feet).

For cables that run through plenums or air-handling spaces as described in 
NEC (2002) Article 300.22(C), the cable should be suitable under NEC Article 
800.50 and marked accordingly for use in plenums and air-handling spaces 
with regard to smoke propagation, such as CL2-P, CL3-P, MPP or CMP.

Be sure to install cables in accordance with all applicable local regulations and 
practices.

Gigabit Ethernet Ports

The GE ports provide high-bandwidth uplinks between the Alcatel Wireless 
LAN Switch and the wired LAN. The GE port sockets accept a variety of Gigabit 
Interface Converters (GBICs) for versatility in selecting optical and electrical 
interfaces.

Approved GBICs

Approved GBICs are typically selected when the line card is purchased. 
Although the modules are user-replaceable, for continued safety and reliability 
only approved modules from approved vendors should be used.

The following Class 1 GBICs have been tested with this product:

For more current information on modules of other types and from other 
vendors, visit our Web site or contact customer support (see 

7-7 Approved GBICs

1000BASE-T (copper)

Alcatel 

OWA-GBIC-T

Molex

74740-0001

1000BASE-SX (optical)

Alcatel 

OWA-GBIC-SX

Delta

GBIC-1250A3FS

OCP

DTR-1250-MM-GB

Agilent

HFBR-5601

1000BASE-LX (optical)

Alcatel

OWA-GBIC-LX

OCP

DTR-1250-SM-GB-L1