Alcatel-Lucent omniaccess Manual De Usuario
OmniAccess RN: User Guide
136
Part 031650-00
May 2005
z
In the
User Name
field, enter the MAC-address of the device to be used,
(this is the MAC-address of the physical interface that will be used to
access the network). The entry should be in xx:xx:xx:xx:xx:xx format.
(If you are using an external RADIUS server, the username/password
format is: xxxxxxxx.)
access the network). The entry should be in xx:xx:xx:xx:xx:xx format.
(If you are using an external RADIUS server, the username/password
format is: xxxxxxxx.)
z
Enter the same address in the above mentioned format in the
Password
and
Verify Password
fields.
z
If you want to assign a special role to the user that is different from the
MAC-based authentication default role, in the
MAC-based authentication default role, in the
Role
field enter the role
for the user.
z
Select the
Enabled
checkbox to activate the user.
z
Click
Apply
to apply the settings.
2
Deleting/ Disabling user from the database
z
To delete a user from the database, navigate to the
Security > AAA Serv-
ers > Internal Database
page.
z
Click
Delete
to the right of the user you wish delete. The user is
deleted.
z
You can also disabled the user such that the entry will exist in the data-
base but will not be used for authentication purposes. This can be
achieved by clicking
base but will not be used for authentication purposes. This can be
achieved by clicking
Disable
on the right of the user entry.