Alcatel-Lucent iptouch 300 Manual De Usuario
Programming your telephone
21
6
•
Locking the keypad
•
Lock the keypad automatically
You can configure your set so that the keypad is blocked automatically after 5, 10 or 20 seconds.
•
Unlocking the keypad
6.11
Configure the set according to the background noise (Noise mode)
This function is used to configure the set to obtain optimal listening conditions depending on the background noise.
•
Normal: corresponds to most office environments.
•
High: corresponds to an average level of background noise.
•
Severe: corresponds to an extremely high level of background noise.
6.12
Activate/deactivate the Key tones
By default the set emits a tone each time a key is pressed.
To deactivate these tones:
To deactivate these tones:
select the time
period before
the automatic
the automatic
locking
FCN
Key Lock
OK
FCN
OK
#
FCN
Noise mode
OK
FCN
Key tones
OK
6.13
Activate/deactivate the Warning tones
The warning tones inform the user of an abnormal operation (out of range, system activated or halted, etc.).
To deactivate these tones:
To deactivate these tones:
Enable tones
OR
Desable tones
OK
FCN
Warning tones
OK
Enable tones
OR
Desable tones
OK