Alcatel-Lucent omniacces-voip gateway Manual De Usuario
VoIP Commands
Page 5-86
Command Usage
Specify Ear & Mouth signaling time to wait for on-hook after a clear.
Syntax Options
Remarks
In order to use this command, the
voice signaling protocol
command must be set to the corre-
sponding protocol type of E&M Wink Start, Immediate Start, or Delay Start Signaling.
voice signaling em clear confirm wait max
voice signaling channel <
slot/port/startChannel-endChannel
> em clear confirm wait max[imum]
<
value
>
Definitions:
slot
slot
Specifies chassis slot number where VSM is installed, (e.g.,
2
).
port
Specifies physical port number on voice daughtercard, (e.g.,
1
).
startChannel
The first number in the range of voice channels (e.g.,
1
).
endChannel
The last number in the range of voice channels (e.g.,
30
).
♦ Syntax Note ♦
Be sure to separate the start and end range numbers with a
hyphen (e.g.,
1-30
).
imum
Optional command syntax. Type either
max
or
maximum
in the command line.
value
Specifies the maximum duration (delay interval) to wait for an on-hook response on the
M-lead after going on-hook on the E-lead, (e.g.,
M-lead after going on-hook on the E-lead, (e.g.,
25000
).
♦ Syntax Note ♦
Do not use commas when entering the E&M on-hook after a
clear detect value (for example,
clear detect value (for example,
60,000
will return a syntax error
message).
Default:
The default value is
The default value is
60000
.
Command Examples:
voice signaling channel 2/1/1-12 em clear confirm wait maximum 60000
voice signaling channel 2/2/13-24 em clear confirm wait max 25000
voice signaling channel 2/3/1-30 em clear confirm wait max 45000
voice signaling channel 2/2/13-24 em clear confirm wait max 25000
voice signaling channel 2/3/1-30 em clear confirm wait max 45000