Alesis SR18 Manual De Usuario

Descargar
Página de 76
 
 
14
 
 
 
 
FOOTSWITCH CONTROL
 
 
Now that we have the basics down, let's investigate some live performance options using footswitch 
control.  This is particularly useful if you're playing along with Patterns and Songs on the pads and can't 
use your hands to punch buttons. 
 
There are two jacks for footswitches (Start/Stop and Count/A/B/Fill).  Always plug these footswitches in 
before turning on power.  Either normally open or normally closed types (the two most common 
footswitch types) can be used; the SR18 determines which kind is in use during power-up. 
 
Here's how to use the footswitches: 
 
SET TEMPO 
 
The SR18 must be stopped.  Before playing a Song or Pattern, tap the Count/A/B/Fill jack footswitch 
several times at the desired tempo.  The SR18 will average the time between taps and derive a tempo, 
the display will update the tempo with each tap.  Tapping the TAP TEMPO button accomplishes the 
same result as tapping the Count/A/B/Fill footswitch. 
 
START A SONG OR PATTERN 
 
When the SR18 is stopped, pressing the Start/Stop footswitch is equivalent to pressing PLAY.  When 
the SR18 is running, pressing the Start/Stop footswitch is equivalent to pressing STOP. 
 
INITIATE A FILL WHEN PLAYING PATTERNS 
 
When playing patterns, the Count/A/B/Fill footswitch duplicates the FILL button function. 
 
CANCEL A TRANSITION FROM A TO B, OR B TO A, PATTERNS 
 
When you initiate a Fill, an A Pattern will transition to a B pattern (or vice-versa) when the Fill has 
finished playing.  However, you can cancel this transition if desired.  We've already explained how to do 
this with the front panel FILL button.  However, you can also use the Count/A/B/Fill footswitch.  If you 
press the footswitch before the fill has finished playing and hold it down until after the fill has played (i.e, 
past the downbeat of the next Pattern), the SR18 will return to the original Main A or B Pattern. 
 
EXTEND A SONG STEP WHEN PLAYING BACK A SONG 
 
During Song playback, pressing and holding the Count/A/B/Fill footswitch until past the end of a Song 
Step will cause that step to repeat.  This is great if the soloist wants to take a few more bars. 
 
 
ADDITIONAL INFORMATION
 
 
For more information, please see the SR18 Reference Manual.  Additional information may also be 
found on www.alesis.com.  
  
For technical support: 
 
EMAIL: support@alesis.com 
PHONE: 1-401-658-5760 (U.S.) 
 
TECHNICAL SPECIFICATIONS 
 
Main and Aux outputs:  
SNR 94dB 
A-weighted 
THD+N 
~0.004% @ 1.38KHz 
Samples:    
 
32MB 16 bit, max 44.1kHz sample rate uncompressed PCM 
Pads:   
 
 
12 velocity-sensitive pads 
MIDI:  
 
 
In, Out/Thru 
Power:  
 
 
Input 12VDC 600mA, center pin is ground 
 
 
 
6 AA batteries, 1.5V nominal each 
Weight:  
 
2 lbs 
Dimensions:   9.6" x 7.5" x 1.8"