Aopen aon101 Manual De Usuario
95/98 system.
The adapter default is NE2000 mode. For Plug
and Play environment, please switch to PnP
mode or execute SETUP.EXE choose the
operating mode is PnP mode. Attach the cable
and connector, it will automatic detect the
medium type to use.
The adapter default is NE2000 mode. For Plug
and Play environment, please switch to PnP
mode or execute SETUP.EXE choose the
operating mode is PnP mode. Attach the cable
and connector, it will automatic detect the
medium type to use.
•
Running Jumperless (NE2000) mode
Please switch to NE2000 mode and execute
SETUP.EXE. A screen will guide you to
configure the adapter to fit your computer
system’ s environment.
SETUP.EXE. A screen will guide you to
configure the adapter to fit your computer
system’ s environment.
•
Running Diagnostics
You can select “ Run Diagnostics” in
SETUP.EXE menu to do the diagnostic to
check your Ethernet adapter. The diagnostic
will check the adapter. Then report the results.
It can help you to isolate and problem to a
specific adapter and to figure out whether
adapter or cable causes the problem.
If the diagnostic succeeds, “ PASS COUNT” or
“OK” message is displayed at the bottom of the
screen.
If the diagnostic fails, afterward, an error
SETUP.EXE menu to do the diagnostic to
check your Ethernet adapter. The diagnostic
will check the adapter. Then report the results.
It can help you to isolate and problem to a
specific adapter and to figure out whether
adapter or cable causes the problem.
If the diagnostic succeeds, “ PASS COUNT” or
“OK” message is displayed at the bottom of the
screen.
If the diagnostic fails, afterward, an error