ASUS m4a88td-m evo usb3 Manual De Usuario

Descargar
Página de 80
1.7.2 
Memory configurations
You may install 512MB, 1GB, 2GB, and 4GB unbuffered ECC and non-ECC DDR3 DIMMs 
into the DIMM sockets.
•  You may install varying memory sizes in Channel A and Channel B. The system maps 
the total size of the lower-sized channel for the dual-channel configuration. Any excess 
memory from the higher-sized channel is then mapped for single-channel operation.
•  We recommend that you install the memory modules from the blue slots for better 
overclocking capability.
•  Always install DIMMs with the same CAS latency. For optimum compatibility, we 
recommend that you obtain memory modules from the same vendor. 
•  AMD AM3 100 and 200 Series CPU support up to DDR3 1066 MHz.
•  When overclocking, some AMD CPU models may not support DDR3 1600 MHz or 
higher frequency DIMMs.
•  Due to the memory address limitation on 32-bit Windows
®
 OS, when you install 4GB 
or more memory on the motherboard, the actual usable memory for the OS can be 
about 3GB or less. For effective use of memory, we recommend that you do any of the 
following:
  - 
Install a maximum of 3GB system memory if you are using a 32-bit Windows
®
  
 
OS. 
Use a 64-bit Windows
®
 OS if you want to install 4GB or more memory on the   
 
motherboard.
•  This motherboard does not support DIMMs made up of 256 megabits (Mb) chips or less.
M4A88TD-M EVO Motherboard Qualified Vendors Lists (QVL) 
DDR3-2000(O.C.)MHz capability
•  The default memory operation frequency is dependent on its Serial Presence Detect 
(SPD), which is the standard way of accessing information from a memory module. 
Under the default state, some memory modules for overclocking may operate at a 
lower frequency than the vendor-marked value. To operate at the vendor-marked or at a 
higher frequency, refer to section 3.5 Ai Tweaker menu for manual memory frequency 
adjustment.
•  For system stability, use a more efficient memory cooling system to support a full 
memory load (4 DIMMs) or overclocking condition.
Vendor
Part No.
Size
SS/DS
Chip 
Brand
Chip 
NO.
Timing
Voltage
DIMM socket 
support (Optional)
A*
B*
C*
KINGSTON KHX2000C8D3T1K3/3GX(XMP)
3072MB(kit of 3)
SS
-
-
-
1.65V
KINGSTON KHX2000C9D3T1K3/3GX(XMP)
3072MB(kit of 3)
SS
-
-
-
1.65V
KINGSTON KHX2000C8D3T1K3/6GX(XMP)
6144MB(Kit of 3) DS
-
-
-
1.65V
Transcend
TX2000KLU-4GK(XMP)
4096MB(Kit of 2) DS
-
-
9-9-9-24 1.65V
Chapter 1: Product introduction
1-12