ASUS kn97 Manual De Usuario

III. INSTALLATION

(System Memory)

SIMM Memory Installation

1. The SIMM memory modules will only fit one way as shown. The central notch

of the module must be aligned with the rib midway inside the slot while the
other notch at one end of the module must be aligned with the plastic safety tab
on the slot.

R

1 2 3 4 5 6

Notch

Rib (inside slot)

Safety tab

2. Push the memory module gently but firmly into place starting from a 45-degree

angle making sure that all the contacts are aligned with the socket.

3. With your fingertips (pointer) on the slot’s clips and your thumbs holding down

its top edges, push the SIMM into a vertical position so that it clicks into place.

Support Clip

Safety Tab (This Side Only)

Mounting Hole

4. The plastic guides must go through the two mounting holes on the SIMM’s

sides.

5. If you need to remove one or more memory modules, remove them by pushing

the clips outward. The SIMM will be released from its slot, and you can pull the
SIMM straight up and out of the slot.