ASUS p3bf Manual De Usuario
ASUS P3B-F User’s Manual
27
3. HARDWARE SETUP
CPU
3. H/W SETUP
3.6.5 Removing the Processor
SECC: Push the SECC’s two locks inward to disengage the latch feature and firmly
lift the SECC assembly out of the URM.
lift the SECC assembly out of the URM.
SECC2/SEPP:
URM (A): Unlock the URM by pushing the two locks down and then pull the
SECC2/SEPP assembly out.
URM (B): Place one hand on the heatsink and your other thumb on the top of one
of the URMs. Push the URM away from the assembly with your thumb while you
rotate the processor out of the slot 1 connector with the other.
SECC2/SEPP assembly out.
URM (B): Place one hand on the heatsink and your other thumb on the top of one
of the URMs. Push the URM away from the assembly with your thumb while you
rotate the processor out of the slot 1 connector with the other.
SECC2/SEPP
Push lock inward
CPU fan cable to
fan connector
fan connector
CPU fan cable to
fan connector
fan connector
3.6.6 Recommended Heatsinks for Slot 1 Processors
The recommended heatsinks for the Slot 1 processors are those with three-pin fans
that can be connected to the motherboard’s CPU fan connector. These heatsinks
dissipate heat more efficiently and with an optional hardware monitor, they can
monitor the fan’s RPM and use the alert function with the Intel LANDesk Client
Manager (LDCM) or the ASUS PC Probe software.
that can be connected to the motherboard’s CPU fan connector. These heatsinks
dissipate heat more efficiently and with an optional hardware monitor, they can
monitor the fan’s RPM and use the alert function with the Intel LANDesk Client
Manager (LDCM) or the ASUS PC Probe software.
SECC Heatsink & Fan
SECC2 Heatsink & Fan
NOTE: The SEPP heatsink and fan (for Intel Celeron processors) is similar to the
SECC2 heatsink and fan except that the clamping design is different.
SECC2 heatsink and fan except that the clamping design is different.
CAUTION!
You may wear gloves to protect your hands from the sharp edges
when removing SECC2/SEPP processors.